$SAVE$ On-Hold Plus 4000, Music On Hold,OHP 6000,On Hold Plus 6000,On-Hold Plus 6000,OHP 6000,Message on Hold, Music On Hold for Analog Telehpone,MP3 On Hold Audio Player,ohp6000

	Digital On-Hold Audio Player (OHP6000)
Digital On-Hold Audio Players For PBX Telephone Systems

Detailed Specs

Sound Quality:

The OHP 6000 can play better than CD quality files at a bitrate of high as 196 KBPS and sample rate of 48kHz. Fantastic sound quality can be achieved at a bitrate of 32kbps and a 32K sampling rate for MP3 and a 20k sampling rate for WMA (Windows Media Audio).

Input: USB port

Sample Rate: 8 kHz

Output:

	8 ohm: 4 volts peak to peak
	600 ohm: 8 volts peak to peak

Minimum operating system;

(required only if loading audio directly to player via USB connection):

	Windows - 98, 98 ME & SE, 2000, XP
	Mac - OS 9.0.4 or later, OS X 10.1 or later

Memory:

	Built in: 16mb
	Expansion: SMC Card Slot accepts 16, 32, 64 or 128mb Smart Media Card (SMC)

Connectors:

	Audio out: RCA jack
	USB:
	Power: 2.5mm power jack

Switches/Controls:

	Power on/off
	Play/pause
	Volume up/down
	Skip up/down
	Repeat mode
	Monitor speaker on/off
	Impedance 8ohm/600ohm

Power:

	9VDC @500mA
	Source -110VAC, 60Hz UL/CSA power pack

Physical:

	Size: 9" x 7" x 2.25" (LWD)
	Weight: 3 lbs
	Wall mountable

OVERVIEW

Revolutionary digital music-on-hold playback system supports MP3 and WMA audio formats. The unit has 16mb of on board memory preloaded with over 57 minutes of great sounding licensed music content, so it’s ready to go right out of the box. Add new content to the player by connecting to a PC via the USB port or just slip in a Smart Media Card with new content.
By adding a Smart Media Card you can increase the memory to 128mb and over 9 hours of content!

FEATURES

	USB connection - Connect to your PC via USB to add new content or update firmware.
	PC connection...strictly optional - Unit uses PC only to update content stored in flash memory. Updated content can optionally be added by copying an MP3 or WMA audio file to a Smart Media Card without the unit ever being connected to a PC or network.
	MessageStudio software - Allows users to create new on-hold audio content with voice and music on their PC with a few mouse clicks. Then, just transfer the file directly to the unit’s on-board memory, to a Smart Media Card, or upload to a server for a network update.
	Auto start after power loss - Retains stored preferences such as: music selection, repeat mode and volume settings. If power to the unit is lost, unit immediately returns to continuous playback with all settings without human intervention.
	LCD Control Panel - 6 line backlit LCD panel displays ID-3 tags with descriptive names of tracks for easy identification and selection. Display also shows a variety of important information so user can choose playback preferences and easily determine unit's operational status.
	Flash memory - 16MB of on-board flash memory stores over 57 minutes of awesome sounding content. Additional Smart Media Cards (not included) can add over 9 hours of content for continuous playback.
	Ready to go right out of the box - Pre-loaded with several files containing great sounding music mixed with intermittent “thanks for holding…” messages. Just plug it in and walk away. Anything else is completely optional.
	Free personalized on-hold message - customer's name is inserted into the message pre-loaded in the player's memory
	Simple, plug-in installation - Easily connects to any "music-on-hold ready" PBX or KEY system (95% of all phone systems) or optional music-on-hold adapter module.
	3-YEAR Warranty Download User Manual (PDF) Download Product Sheet (PDF)